Inserting The Battery Pack; Starting The Tool; General Power Tool Safety Warnings - Desoutter BLRTA045-3990-10S Instrucciones De Seguridad

Tools used together with a reaction bar: Never put your
hand near or close to the reaction bar while the tool is being
used. Be aware of the rotational direction of the spindle be-
fore starting the tool, the reaction force may work in an unex-
pected direction with risk of crushing injuries.
For tools containing a clutch: Immediately after adjusting
the clutch, check for correct operation.

Inserting the battery pack

In the following illustration, the tool is shown without
its protective cover.
Insert the battery pack in front or behind the tool until a lock-
ing sound can be clearly heard.
There is no ON/OFF switch: the tool is ready to operate as
soon as a battery pack is mounted.
When the tool is powered on, tool LEDs are blinking.
NOTICE Usage recommendations for battery packs
Ensure a longer service life of the battery pack.
Unplug the battery pack when the tool is not used.
►
Do not leave the battery pack on the charger when the
charger power supply is off.

Starting the tool

Fit the tool with a suitable socket.
Select the appropriate Pset.
Hold the tool by means of the handle and apply to the fas-
tener to be tightened.
WARNING Risk Of Injury
As the reaction force increases in proportion to the tight-
ening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
Make sure that the tool is in perfect working order
►
and the system is programmed correctly.
Press the trigger to start the tool.
How to reverse the rotation
In the following illustration, the tool is shown without
its protective cover.
12/2021
General Service and Maintenance Safety
Always keep the controller switched off during service in or-
der to avoid unexpected start-up.
Refer servicing to qualified personnel only.
Cleaning Instructions
Clean parts with a damp cloth. Only use water, no cleansers
containing solvents should be used.
Contact your Desoutter service technician for cleaning ad-
vice as per current recommendations and for your particular
tool.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if your
body is earthed or grounded.
7 / 184
Safety Information