Operation; On-Screen Display (Osd); Accessing The On-Screen Display - Stryker VisionPro Manual Del Usuario

Operation

Operate the display using the rotary control and the four buttons located on the front panel� A list
of the display controls and their functions is provided below�

On-Screen Display (OSD)

Accessing the On-Screen Display

To use the four front-panel buttons:
Audio/PIP (VisionPro SYNK 26" Wireless LED Display):
1�
• Press twice to activate Picture Mode (Picture in Picture, Picture by Picture, Picture on
Picture)
PIP (VisionPro 26" LED Display):
2�
• Press to activate Picture Mode (Picture in Picture, Picture by Picture, Picture on Picture)
Bright: Activates the Brightness adjustment menu�
3�
Specialty: Activates the Specialty adjustment menu�
4�
5� Input: Activates the Input selection menu�
Use the Rotary Control to navigate the on-screen menus once they are activated:
Push — Accesses/selects on-screen display menu�
•
• Turn Right/Left — With the on-screen display menu activated, turning increases/decreases
the value of the selected parameter�
Push and Hold — Exits on-screen display menu�
•
14
3
1 2 4