Publicidad
The assembly EAntenna EA6J is practical and simple. In a few steps you can have the antenna mounted.
The plates (EA010088 and EA010088.1) consisting of 6 holes each. The EA010088.1 is threaded and EA010088 has holes where they need to
go screws inserted tubes positioned 35mm diameter (EA6J#1 and EA6J#2).
Binding to the plate can be easily identified, because the tube have an mark at 20cm fix to the tube diameter of 30mm and other 3 with hose
clamps.
EA010088
STEP #1
The first step is to insert the DIN 912 M6X60 screws on the plates. The screw head should be housed on the plate EA010088, so that the screw
thread on the EA010088.1 plate.
Once full threaded screws 6, the latest in this step is to put the DIN 985 M6 nuts to fully secure the plates to the elements cough.
EA010088
EA010088.1
DIN 912 M6X60
DIN 985 M6
EA010088.1
ENGLISH
Publicidad
