Basic Operation; Setting The Osd Language - BenQ S30 Guía Rápida

QUICK GUIDE
ENGLISH
Knowing the Parts
Gooseneck Arm Remote Control Signal Receiver 1
LED Lamp Antitheft Slot
Camera Head Remote Control Signal Receiver 2
DC 5V Power Socket Control Panel
VGA Output Port SD Card Slot
VGA Input Port USB Port
Power On
1. Plug in the power cord.
2. Press the Power button ( ) to turn on the Document Camera.
Connecting the Output Display
► Via VGA Port
1. Turn on projector or any display device and make sure the source key
of document camera is at DC icon( ).
2. Connect a VGA Cable to VGA OUT Port
3. Connect the other end of VGA Cable to VGA In Port of your projector
or display device.
► Via USB Port
1. Turn on projector or any display device and make sure the source key of
document camera is at DC icon( ).
2. Make sure the USB connection setting is at "PC-Cam".
3. Connect a USB cable (type B end) to USB port.
4. Connect the other end of
USB cable (type A end)
to USB port of your
projector or display
device.

Setting the OSD Language

1. Press the MENU button ( ) .
2. Select Setting→Language.
3. Use Up/Down Arrow to adjust and press OK ( ) to confirm.
Connecting to a PC for Computer Presentation
► Pass through
1. Connect a VGA Cable to VGA Input Port
2. Press PASSTHROUGH Button ( ) to switch between DC mode and PC mode.
RGB
► Working with Qvision
1. Connect PC and Document Camera by using USB cable
2. Make sure you already install Qvision on your PC from the CD provided
3. Check if the device USB connection setting is at "PC-Cam".
4. Execute Qvision
Notices for Operation
1. Please adjust the camera head with one hand on the base.
2. To Prevent your eyes from damaged, please do not look directly
to the LED lamp.
3. Choose the focus mode according to distance to object:
RGB
Normal mode for 25cm to ∞.
Macro mode for 1cm to ∞.
*Optical zoom won't be available when in MACRO mode.

Basic Operation

Power on/off
Capture a still image
Record a video and audio clip
Freeze the current image
*Pause the clip while playing video
Macro/Normal Switch
Show Menu and select
Direction button
Zoom out
One-time auto focus
Zoom in
Invert image 180°
Delete files from memory when in playback mode
QBOX- Highlight function
Turn on/off and adjusting the brightness of the LED lamp
Enter DC mode (Preview)
Enter Playback mode to see recorded video clips and images.
Enter PC mode to do the "PASSTHROUGH" function.