Care And Cleaning; Error Codes - Uline H-7100 Manual Del Usuario

CARE AND CLEANING

Clean your air conditioner to keep it looking new and to
minimize dust build up.
AIR FILTER CLEANING
The air filter should be checked at least once every
month to see if it needs cleaning. Trapped particles and
dust can build up in the filter and may decrease airflow
as well as cause the cooling coils to accumulate frost.
To clean the air filter:
1. Remove the filter by pulling down on the indents of
the filter door on the front of the unit. (See Figure 10)
Figure 10
2. Wash the filter using liquid dish soap and warm
water. Rinse the filter thoroughly. Gently shake the
filter to remove excess water.
3. Let the filter dry completely before placing it into the
air conditioner.
4. If you do not wish to wash the filter, you may vacuum
the filter to remove the dust and other particles.
PAGE 8 OF 27
MAINTENANCE
Indents
WEAR AND TEAR
To minimize wear and tear on the air conditioner, always
wait at least three minutes before changing modes. This
will help prevent the compressor from overheating and
the circuit breaker from tripping.
CABINET CLEANING
To clean the air conditioner cabinet:
1. Unplug the air conditioner to prevent shock or a
fire hazard. The cabinet and front panel of the air
conditioner may be dusted with an oil-free cloth
or washed with a cloth dampened in a solution of
warm water and mild liquid soap. Rinse thoroughly
with a damp cloth and wipe dry.
2. Never use harsh cleaners, wax or polish on the
cabinet front.
3. Be sure to wring excess water from the cloth before
wiping around the controls. Excess water in or
around the controls may cause damage to the air
conditioner.
WINTER STORAGE
To store the air conditioner when it is not in use for an
extended period of time, remove it carefully from the
window according to the installation instructions and
cover it with plastic or place it in the original box.

ERROR CODES

ERROR CODES
E2 Room temperature sensor failure
E3 Room temperature pipe sensor failure
If the error codes continue to display after unplugging
and plugging in the power cord, call Uline Customer
Service at 1-800-295-5510.
DESCRIPTION
0621 IH-7100