Alarm Setting - Samsung SPD-3000 Manual Del Usuario

Ocultar thumbs Ver también para SPD-3000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Functional Description
PTZ Position : Pan and Tilt position and Zoom magnification are displayed.
• PTZ positions are not displayed in the OFF mode. (Only manual operation can display them.)
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting

Alarm Setting

Initialize
Status
Language : The OSD can be displayed either in English (default setting) or in Chinese.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
5) Alarm Setting
Alarm Enable : It can be determined whether to enable the alarm setting.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
54
SPEED DOME CAMERA
All manuals and user guides at all-guides.com
OSD Setting
Camera ID
ON
Camera Name
Preset Number
ON
Preset Name
Sequence Status OFF
Area Name
OFF
PTZ Position
ON
Language
English
OSD Setting
Camera ID
ON
Camera Name
Preset Number
ON
Preset Name
Sequence Status OFF
Area Name
OFF
PTZ Position
ON
Language
English
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
User's Manual
ON/OFF : Alarm is enabled in ON mode.
Alarm Input : Alarm Input Mode/Priority/Method is set up.
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
NC/NO/OFF : NC/NO/OFF can be selected depending on the alarm sensor.
1 - 4 (Priority) : Priority for the 4 alarm inputs is set up. Response comes first from
the alarm input of higher priority.
Preset/Swing/Group/Tour/Trace/A.Pan:
Whether to enable the operation of Preset/Swing/Group/Tour/Trace/A.Pan by
alarm input can be set up. When the alarm is input, it stays in the preset/Swing/
Group/Tour/Trace/A.Pan position.
Alarm Out : One of the 2 Alarm Outs corresponds to each Alarm input.
Alarm Setting
Alarm Enable
ON
Alarm Input
Alarm Output
MD Dwell Time
ON 30 SEC
OUT1 SET/OUT2 SET
: One of the 4 Alarm Inputs corresponds to the 2 Alarm Outputs.
OUT1 TIME/OUT2 TIME : For the 2 Alarm Outputs, On/Off and the operation time can be
set up in the units of second/minute/hour. (1-59 sec, 1-59 min,
1-59 hour)
SPEED DOME CAMERA
Alarm Input
IN 1 OFF 1 OFF
IN 2 OFF 2 OFF
IN 3 OFF 3 OFF
IN 4 OFF 4 OFF
Alarm Output
Setting 1
1 2 3 4 MD
Setting 2
1 2 3 4 MD
Timer
1 OFF
Timer
2 OFF
OUT Off 1
OUT Off 2
55
User's Manual

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Spd-2300

Tabla de contenido