Installing Windows - ASROCK Z77M Manual Del Usuario

All manuals and user guides at all-guides.com
2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
®

2.13 Installing Windows

RAID Functions
®
If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
®
2.14 Installing Windows
XP 64-bit Without RAID Functions
®
If you want to install Windows
bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.14.1 Installing Windows
®
If you want to install Windows XP / XP 64-bit OS on your SATA / SATA2 / SATA3
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
®
STEP 2: Install Windows XP / XP 64-bit OS on your system.
ASRock Z77M Motherboard
TM TM
7 / 7 64-bit / Vista / Vista
TM TM
7 / 7 64-bit / Vista / Vista 64-bit on your SATA
TM TM
7 / 7 64-bit / Vista / Vista
TM TM
7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit.
Advanced screen Storage Confi guration.
64-bit With
64-bit / XP /
33