Kohler Beauxline 36 Manual Del Usuario página 5

2. Install the Legs
IMPORTANT! Perform this procedure with two people.
Lay the vanity on its back on a flat, padded surface.
Insert the dowels into the cabinet dowel holes.
Position the apron onto the dowels.
Secure the apron using the wood screws (provided).
Position the leg assemblies on the bottom of the cabinet so that the fastener holes line up.
Loosely attach the legs with the truss-head screws (provided).
Align the legs flush with the front edges of the vanity.
Securely tighten the truss-head screws.
60" Vanities: Proceed to "Install the Center Leg (60" Vanity Only)".
All Other Vanities: Carefully stand the vanity upright. Do not slide or side-load the legs.
Kohler Co.
Dowel
Correct
5
Incorrect
1384737-2-A