SMC Networks SMCWTVA100 Manual Del Usuario página 47

e. After configuring the Bridge to Wireless setting, the
will receive its DHCP IP address from your Wi-Fi router.
f. Reconnect to the SMCWTVA100 and refer to Step 4.
Note: Due to the IP change you will need to re-connect your PC's wireless SMCWTVA100 connection.
Refer to Step 8d of the PC to TV Mode Setting procedure for setting up the PC to TV connection.
Step 3: Selecting Bridge to Ethernet (connect to the Internet over CAT(x) cable from the RJ-45 port).
a. Select Bridge to Ethernet and then click Apply.
b. Reboot the SMCWTVA100. After configuring the Bridge to Ethernet setting, the SMCWTVA will
reboot automatically. The SMCWTVA100 will receive a new IP from your Internet router. It will be
displayed on the TV screen.
c. Re-connect your PC to the SMCWTVA100 Wi-Fi access point. Due to the IP change, your PC will
lose its connection to the the SMCWTVA Wi-Fi and may even link to another Wi-Fi router. In your
PC's wireless settings, re-link it to the SMCWTVA100 and refer to step 8d of the PC to TV Mode
Setting procedure to use the PC to TV function.
SMCWTVA100 will restart automatically and
47