Technical Data - Weka KS30 Instrucciones De Funcionamiento

2. S P E C I A L S A F E T Y P R E C A U T I O N S - Please note!
This drill rig is intended for commercial use only. It may only be used by trained personnel.
It is intentional used as a stand for fixing diamond core drill for drilling rock, concrete and masonry.
For operation the relevant regulations have to be observed.
3. I N D I C A T E D C O M P O N E N T S
1 Rig foot
2 Swivel foot
3 Jackscrew
4 Rig column
5 Gear rack
6 Guide rail
7 Drilling angle - adjusting
8 Angle scale
9 Level for horizontal leveling
10 Carrying handle
11 Screws for quick connect plate (M8x20)
12 Parallel key for quick connect plate
13 Quick connect plate (DK26, 32, SR38:
KS30745; SR25: KS30745.2)
14 Eccentric bolts of machine fixture
15 Feed pinion
16 Feed slide
17 Circular level
18 Steel roll/plastic roll
4. T E C H N I C A L D E S C R I P T I O N
The KS30 is a drill rig which is meant for fixing WEKA diamond core drills type DK26, DK32, SR2 and
SR38. The diamond drill rig can be fixed to the ground and to the wall by means of dowels, vacuum or
quick bracing columns.
The core drill exists of a eletric motor with step-down gear. Via the quick connect nipple water is supplied
directly to the drilling tool (diamond core bit). Thus the cutted material is flushed away and the tool is
cooled (wet drilling).
The drilling tool (diamond core bit) is a hollow drill (tube) which is fitted with soldered-on or welded-on
segments impregnated with diamonds.
In the wet use, if necessary, the flushing water is extracted through a water collecting ring by means of
an all-purpose suction unit.
Avoid wet drilling upwards (overhead drilling) (Überkopfbohrungen). If it is indispensable
use a proper working water collecting ring.
3.1

Technical data

Type
Total length
Drill stroke
Core bit diameter max.
vacuum fixture
Inclination
Machine fixture
Rig foot (LxB)
Weight (without feed wheel)
KS30
mm 950
mm 580
mm 300 (350)
mm 200
deg >45
Quick change plate
mm 340 x 223
kg 13
8
19 Fixing brake
20 Hand wheel
21 Water collecting ring
22 Sealing cover
23 Sealing ring
24 Tension spring
25 Vacuum adaptor
26 Sealing tape
27 Dowel
28 Quick clamping spindle
29 Washer
30 Split nut
31 Distance plate
32 Screws for distance plate (M8x45)
33 Hexagon nut of eccentric bolt
34 Hexagon socket screws of guide roll
35 Stop bolt
KS30E KS30S
950 950
580 580
300 (350) 300 (350)
200 -
>45 >45
340 x 223 340 x 223
11 14