BCV2000/2000F/3000FI/IUK04M V.q
7/1/04
U.K. and IRELAND
CONGRATULATIONS!
Your Bionaire
™
Heater has been designed using
the latest in technology. With normal care and
maintenance, your Bionaire
Heater will provide
™
years of satisfactory performance.
RETAIN THE FOLLOWING FOR FUTURE
REFERENCE.
DESCRIPTIONS (SEE FIG 1/2)
A. Outlet grill
B. Removable feet
C.Temperature selector control knob
All manuals and user guides at all-guides.com
15:15
Page 7
• If the heater is tipped over, unplug it and allow
it to cool before standing it back up.
• DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using
inflammable glue or solvent (e.g. when gluing
or varnishing parquet floors, PVC etc.)
Safety in use
• Extra caution is necessary when the heater is
used near children or when it is left unattended.
• DO NOT insert any objects into the heater.
• Keep the mains cord at a safe distance from
the main body of the heater.
• Prevent overheating of the heater by keeping
the air inlet and outlet unblocked. DO NOT
hang anything in front of or above the heater.
Using the turbo fan
(BCV2000F and BCV3000F only)
You can use the turbo fan feature for even more
rapid and uniform heating. To use the turbo fan
feature, set the power knob onto the third setting (III).
WALL MOUNTING (SEE FIG. 3B-3G)
Important: Before drilling into any wall ensure
no electrical cables are present in the area.
1. Remove feet from main unit
2. Using dimensions provided in Figure 3B, drill
holes for wall mounting brackets.
3. Insert plastic wall nails to holes.
4. Insert screws through holes of wall brackets,
then tighten. Be sure bracket 2 is mounted on
the bottom.
must be connected to the terminal which is
marked with the letter "E" or by the earth symbol
or coloured GREEN or GREEN AND YELLOW.
The BROWN coloured wire must be connected
to the terminal, which is marked with the letter
"L" or is coloured RED.
The BLUE coloured wire must be connected to
the terminal, which is marked with the letter "N"
or is coloured BLACK.