Jocel JMO011480 Manual De Instrucciones página 41

OPERATION OF CONTROL PANEL
6. CLOCK SETTING
Clock button make it available for you to input current or preset time when "1:00" flashes onto LED display
after plugged in.
Example: to set 12:30
Steps
1 After power-up, the colon flashes
2
Press and hold
3
Turn
4
Press
5
Turn
Press
6
the numbers will go steadily.
1. BEFORE COOKING
The LED flashes 3 times when plugged in power supply. Then it flashes
"1:00", prompting you to input the cooking menu and time
2. TIME/WEIGHT KNOB
You can increase or decrease cooking time, weight during operation by
turning the knob.
3. PAUSE/CANCEL
At the initial or input stage: press once to cancel input programs and resume
initial stage.
During cooking: press once to stop oven operation, press twice to cancel
cooking programs.
4. AUTO REMINDER
When your preset cooking procedure have finished, the LED Display will
show End and three beeps sound will be heard to prompt you to take out
food. If you do not press Pause/Cancel button once or open the door, the
beep will be sounded at an interval of 3 minutes.
5. INSTANT COOKING
On the standby status, press Instant/Start button, the oven will start cooking
with high power; system default cooking time is 1 minute. You can increase or
decrease cooking time by turning the knob.
/ button for 3 seconds
knob to set exact hours.
button once again.
/
knob to set exact minutes.
/ button once again or wait for 60 seconds, and
-40-
Display
1:00
1:00
12:00
12:00
12:30