Uline H-6859 Instrucciones De Montaje página 3

6. Set cabinet upright. Install male component of four
shelf supports (E) in holes at same height on side
panels (4 & 5) inside of cabinet. (See Figure 5)
Figure 5
4
7. Slide shelf in above shelf supports (E) and set it down,
ensuring it is level and seated securely.
(See Figure 6)
Figure 6
8. Install cam lock pins (A) and dowels (C) in top
panel (6). (See Figure 7)
9. Align L-Bracket from lock set (G) with holes in top
panel (6). Insert two M3 x 14 mm screws (I) from lock
set and secure. (See Figure 7)
Figure 7
G
I
PAGE 3 OF 12
ASSEMBLY CONTINUED
5
E
E
7
6
C
10. Insert cam locks (B) into corresponding holes in back
panel (1) and side panels (4 & 5). Flip over top panel
(6), fit together with back panel and side panels and
turn each cam lock clockwise until it locks.
(See Figure 8)
Figure 8
1
11. Assemble frame hinge wing (H) and door hinge wing
(H) and align with holes in right door (9) and right
side panel (5). Insert six M4 x 17.5 mm screws and
secure. Repeat for remaining hinges. (See Figure 9)
Figure 9
A
6
4
B
L
5
9
H
5
H
1121 IH-6859