Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Impact
mechanism:
Square
Drive:
Max. loosening torque (counterclockwise): 678 Nm
Max. working torque (clockwise):
Working torque:
Free
Speed:
Operating pressure:
Averange Air
Consumption:
Air Inlet:
Recommended Hose
Noise:
Vibration:
Length (with outer square) :
Weight:
CAUTION
Read and understand all rights and information in this manual.
Failure to comply with unconscious rights and information may include control and oversight.
Keep the operating instructions in a certain and controlled place for future reference.
SAFETY INSTRUCTIONS
•
Ensure that the tool is in the OFF position when it is connected to the compressed air
system.
•
Always wear approved safety glasses when using compressed air tools. Wear a suitable
respirator when dust is whirled up.
•
Only use accessories suitable for compressed air. Risk of injury.
•
Disconnect the tool from the compressed air supply before installing accessories or
performing maintenance or before the device is not in use.
•
Always use the tool with common sense. Do not wear loose clothing or jewelry that can be
caught by moving parts as it can cause injury. Only operate the tool at a safe distance from
yourself and others.
•
Observe the manufacturer's instructions for the compressed air system when installing
regulators, filters and other accessories.
•
Keep children and other unauthorized persons away from the work area.
•
Do not let children play with the tool or its packaging.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Impact Wrench
Twin Hammer
1/2" (12,5 mm)
542 Nm
434 – 542 Nm
11000 rpm
90 PSI (6.3 Bar)
102,26 l/min
1/4" / 6,3 mm
Ø:
3/8" (10 mm)
LpA = 106.81 dB(A)
LwA = 117.81 dB(A)
ahd = 5.8 m/s²
K = 1.07 m/s²
130 mm
1500g
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 3245
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
