Swiss Peak P329.451 Manual Del Usuario página 4

PAIRING:
1. Turn on the headphones by pressing and holding down the phone
button on the headphones for three seconds
2. The device's LED indicator will illuminate. The LED indicator light will
blink between red and blue when it is in pairing mode.
3. On the mobile device (smartphone/tablet) turn on the BT connection.
4. Select "Swiss Peak" in the available Wireless devices on your mobile
device.
To reconnect:
Simply turn on the headphones and have BT turned on your mobile device
and the headphones will automatically reconnect.
FAQ:
• How far will the Bluetooth headphones work from the paired device?
The Bluetooth will stay connected to the paired device up to 30ft/10M
• Headphones will not connect to phone: Be sure the headphones and
phone are in pairing mode
• No sound on headphones: Make sure the headphones are properly
paired and connected to the phone and be sure you are within the
30ft/10M distance
• Headphones will not start: Make sure the headphone is charged
NOTICE:
1. Keep the product dry; do not place the product in damp places
2. Keep out of direct sunlight and high temperatures High temperatures
may result in damage
3. Keep out of cold temperatures, this will help avoid internal damage
4. Do not disassemble the product
5. Avoid dropping the headphones
6. Do not continue to charge the headphones over 10 hours
7. When charging use the Micro USB charging cord that came with the
headphones.