BaByliss PRO FX685E Manual De Instrucciones página 9

All manuals and user guides at all-guides.com
Non-moving
blade
Moving
blade
• The top blade teeth (larger blade)
should be 1mm above the bottom
blade (smaller cutting blade). This
is important so that the clipper
does not cut too close, or come
in contact with the skin as this
may cause injury.
• The extreme left-hand tooth of
the top non-moving blade must
cover or be to the left of the first
small tooth on the moving supply
blade.
• Be sure to add a few drops of the
oil included with the clipper to
the blades before running.
IMPORTANT: You must tighten the
screws after the blades have been
aligned.
POWER & VIBRATION SCREW
The power & vibration screw
permits you to adjust the power
of your clipper. You may find
it necessary to adjust it to the
p owe r sup p l y in yo ur s al o n
regularly to maintain an optimum
performance.
Fig. 4
1mm
1mm
9