Dehn DEHNcare APHO Información Del Fabricante página 16

We also recommend a safety helmet for electricians; e.g. in line with EN 50365.
The complete protective hood with face shield APS HO (visor) plus safety helmet for electricians is
permitted for work with or in the vicinity of live installations (1,000 V AC or 1,500 V DC).
The complete combination protective hood DEHNcare APHO with face shield APS HO (visor) and
safety helmet for electricians protects the wearer against dangerous electric shocks.
With normal use, the combination provides highly effective protection against the dangers of arcs.
Based on a risk analysis, additional protection measures must also be observed, such as the wear-
ing of gloves, protective clothing, etc.
The arc-fault-tested protective hood DEHNcare APHO is made of neoprene and leather.
This combination provides double protection, because neoprene protects against the direct impact
of an arc fault, and the leather insert offers all-round protection for the nape and throat area (see
Figure 1).
The face shield APS HO (visor) is easy to adjust/move thanks to the separated material structure of
the protective hood (see Figure 1).
When delivered from the factory, the protective hood DEHNcare APHO is fully fixed to the face
shield APS HO with its main parts, nape protection and throat protection.
Fixing is performed using hook-and-loop fasteners on the face shield APS HO and the two hood
sections (see Figure 1).
Hood section with nape protection
Face shield APS HO
Hood section with throat protection
Face shield APS HO (visor) replacement
Figure 1
4