Dehn DEHNcare APHO Información Del Fabricante página 17

The face shield APS HO (visor) to be replaced is separated from the protective hood DEHNcare
APHO by releasing the hook-and-loop fasteners.
The new face shield APS HO (visor) is assembled with the protective hood DEHNcare APHO as
described in the steps below:
Step 1: Connecting the visor holder with the face shield APS HO
Align the notches of the face shield over
the corresponding fixing lugs of the
visor holder.
Step 2: Assembling the face shield APS HO with the throat protection hood section
Attach the pocket-shaped end of the
throat protection hood section to the
corner of the face shield.
Secure the face shield to the visor holder
by turning the fixing lugs.
Fix the hood section along the hook and
loop fastener on the face shield.
5