Duronic PS581 Manual De Instrucciones página 16

In case of a minor paper jam:
1. Grasp the excess paper from the top and pull it out as you depress the
REV button. Be careful not to place your fingers near the feed opening
or else serious harm could occur.
2. Make sure that all of the excess paper has been removed from the
feed opening.
3. You are now ready to resume normal shredding.
In case of a major paper jam:
1. Turn off or unplug the power cord from the AC outlet and wait at least
40 minutes for the thernal overload protection to reset.
2. Plug in the AC power cord and place the switch back into the AUTO
position. If paper was left inside the feed opening prior to the
overload, place the switch in REV and grasp the excess paper from the
top and pull it out. Be careful not to place your fingers near the feed
opening or serious harm could occur.
3. Place the switch back into the AUTO position. You are now ready to
resume normal shredding.
1. ALWAYS keep out of the reach of children as serious injury could
occur.
2. DO NOT place fingers too close to the feed slot as serious injury could
occur.
3. AVOID keeping loose articles of clothing; ties, jewelry, hair or other
items near from the feed opening, in order to prevent injury.
4. ALWAYS keep the shredder off and unplugged when not in use.
5. ALWAYS unplug the shredder when moving, cleaning or emptying the
waste receptacle.
6. DO NOT attempt to feed more sheets of paper into the feeder than
specified.
7. DO NOT attempt to shred materials other than paper and credit cards
in the provided feed slots.
8. ALWAYS install the shredder near the socket-outlet and have it easily
accessible.
WARNING
16