6. With the machine empty, run the motor for 5 seconds before every use
to ensure everything is connected properly.
7. Place the juicer jug (7) under the pouring spout ready to catch the
juice.
8. Now you can start to add your fruit, using the pushing bar (1) to guide
it through steadily while the machine grinds it into juice.
To prolong the life of your juicer we advise you follow this pattern
when juicing:
1 minute juicing - stop for 1 minute - then use for 1 minute again.
After you have used this method 3 times, stop for 15 minutes to allow the
motor to cool.
Power Settings:
1. Turn off the main machine( 6) at the switch [O].
2. Switch off the machine at the power source.
3. Take out the pushing bar (1) and set aside to wash.
4. Lift and pull down the handle (5) towards the side of the machine.
5. Lift off the transparent cover (2), carefully take out the juicing net (3)
and set both aside to wash.
6. Next unclick the middle ring (4) and discard the contents. Set the ring
aside for cleaning also.
7. The feeding bar, transparent cover, juicing net and middle ring can all
be washed by hand with warm soapy water. TAKE CARE: to prevent
injury, wash the juicing net by running it under hot water. Do not
wash it with your hands.
8. When dry, reassemble and store in a dry well-ventilated area.
[ O ] OFF
DISASSEMBLY
[ I ] SLOW
9
[ II ] FAST