Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Water powered desk clock
Features
1.Lid
2. Display
3. MODE key
How to use
1. To activate the clock, take off the lid and fill with fresh water.
2. After a few seconds, the clock will be power-up.
3. One fill of the bottle provides continuous power for around 2
weeks.
4. When the display begins to fade, refill the water tank with fresh
water.
*The time will be kept for 2 minutes during this process.
Setting the time and date
1. To enter the Setting Mode, Press SET key and hold 3 seconds.
Clock mode flashes.
2. To select 12- or 24- hour clock mode, press the UP or DOWN
key.
3. Press SET key again. Hour flashes.
4. To set hour, press the UP or DOWN key.
5. Press SET key again. Minutes flash.
6. To set minutes, press the UP or DOWN key.
7. Press SET key again. Year flashes.
8. To set Year, press the UP or DOWN key.
9. Press SET key again. Month flashes.
10. To set Month, press the UP or DOWN key.
11. Press SET key again. Date flashes.
12. To set Date, press the UP or DOWN key.
13. To exit setting mode, press SET key again.
Setting daily alarm and hourly chime
1. To set the daily alarm, press MODE key once to switch to the
Alarm Mode. "AL" appears on the display.
2. To enable and disable the Daily Alarm, press UP key, means
Daily Alarm is on.
4. SET key
5. UP key
6. DOWN key
Publicidad
