Processor; User Interface; Inputs And Outputs; Power Supply Specifications - dB Technologies DVA K5 Manual Del Usuario

PROCESSOR

Internal controller:
Advanced functions:
Limiter:

USER INTERFACE

Controls:
Led

INPUTS AND OUTPUTS

Power supply inputs and links:
Audio input:
USB:
Audio output:

POWER SUPPLY SPECIFICATIONS

Absorption at 1/8 of full power in
audio average use conditions (*):
Absorption at 1/3 of full power in
audio maximum use conditions (**):
Nominal full power absorption (***):
Draw with speaker turned on without
signal (idle): :
Inrush current:
Total current and power allowed in
daisy-chain configuration (***):
* INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It
is recommended to consider them the minimum sizing values for any type of configuration.
** INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation
of the limiter). We recommend sizing according to these values in case of professional installations and tours.
*** Values obtained using a continuous sinusoidal signal
DVA K5
DSP 25/56 bit/48 kHz
Sensitivity control, 2 8-position rotaries
Limiter, Signal, Mute/prot, Ready
1x XLR IN, balanced
1x USB MINI, type B
1x XLR link OUT, balanced
0,72 A / 76 W (220-240V~) - 1,22 A / 70 W (100-120V~)
1,25 A / 140 W (220-240V~) - 2,12 A / 144 W (100-120V~)
2 A (220-240V~) - 4 A (100-120V~)
14 A / 3200 W max (220-240V~) - 11 A / 1200 W max (100-120V~)
FIR filters
Peak, Thermal
PowerCON In/Link
19 W
18.3 A
Code 420120232 REV.1.1
English
47