Processor; User Interface; Inputs & Outputs; Power Supply Specifications (Absorption / Installation) - dB Technologies SUB 915 Manual Del Usuario

PROCESSOR

Internal controller:
Limiter:

USER INTERFACE

Controls:
INPUTS & OUTPUTS
Inputs:
Outputs:

POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)

Absorption at 1/8th of power in
medium use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
SUB 915 - SUB918
30
28-bit/56-bit DSP
Peak, RMS, Thermal
Delay, Xover/Link, Polarity, Sensitivity
2 x XLR Balanced Inputs
2x XLR Balanced Outputs
1.2 A (220-240V~) - 2 A (110-120V~)
2.7 A (220-240V~) - 4.7 A (110-120V~)
21 W
21.04 A
English
Code 420120322 REV. 1.0