Robur 8135 Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
Release the lever when the cam touches the surface of the sheet (fig. 4), then tighten by returning the lever to its original position
(fig. 5).
The manual effort necessary to tighten the mechanism increases with the thickness of the sheet.
IMPORTANT: check to make sure the contact surfaces are clean and free of substances which could reduce the
friction coefficient between the parts (such as dirt, dust, oil, dampness, etc), as this would reduce the tightening
force and lead to possible slippage.
The load can then be moved and/or lifted.
IMPORTANT: move the load from ground level very slowly to avoid sudden rotation of the load and clamp due
to disalignment between the centre of gravity of the load and the vertical lifting axis. If the load should rotate
during lifting, lower it and adjust the clamp to the correct position.
The clamp joint can be used to rotate and/or overturn a sheet without moving it from ground level or moving beyond the vertical
axis (fig. 6). In this case too, the load has to be clamped securely (fig. 7).
12
8135.indd 12
8135.indd 12
Fig. 4
EN
I
Fig. 5
Fig. 6
Fig. 7
23/02/21 11:01
23/02/21 11:01

Publicidad

Tabla de contenido
loading

Tabla de contenido