DJI T30 Guia Del Usuario página 5

1. Remove the bottom cover on the front of the aircraft. Pry the bottom cover from the gap between the bottom cover
and the rest of the aircraft using a tool if required. Be careful not to damage the cover.
2. When using the T30 aircraft:
a. Unplug the liquid level gauge cable from the port at the bottom of the aircraft front, attach the cover of the port,
and remove the cable from the cable strainer at the bottom of the aircraft.
b. Use the double-ended wrench included in the aircraft package to remove the two nuts that secure the aircraft and
T-shaped connector on the spray tank, detach the T-shaped connector, and attach the stopper to the hoses on the
aircraft.
1
2
c. Lift and remove the spray tank on the aircraft.
© 2021 DJI All Rights Reserved.
4
1
1
2
2