VR46 KD1 Manual Del Usuario página 10

Settings
Power on: press Up/+ and Down/- simultaneously for 3 seconds to enter setting mode; the word SET will
appear on the display.
P1. Backlight brightness setting:
level 1, level 2, level 3. Brightness
level (default 3).
P3. Time setting (min) for automatic
shutdown.
00 = disabled.
P5. Cruise Control:
1 = enabled
2 = disabled.
P2. Unit setting:
0 = Km (default)
1 = Mi.
P4. Assisted start mode:
0 = disabled
1 = enabled.
P6. To restore the factory settings,
press and hold Up/+ until the
display turns off. Simultaneously
press the Up/+ and Down/- buttons
and hold for 3 seconds to exit
setting mode.
08