Assembly And Setup - VR46 KD1 Manual Del Usuario

IMPORTANT
Activate the "Cruise Control" function in the Settings section (P5) and keep the electric scooter at a
constant speed by holding down the accelerator lever for about 7 seconds. An icon will indicate that
"Cruise Control" is active, so it will no longer be necessary to hold down the accelerator lever. Press the
accelerator lever again or the brake lever to deactivate the function
1. Press the lever of the folding mechanism, lift the handlebar stem until you hear a click.
2. Turn the knob following the lever indicated on the side (R-right / L-left) counter-clockwise for the right
one and clockwise for the left one (see photo)
3. Place your hands on the handlebars. Step onto the footrest with one foot and use the other to give
BG yourself a gentle push and accelerate.
remove

6. Assembly and setup

install
09
remove install