Intended Use - BGS technic 8215 Manual De Instrucciones

INTENDED USE

This tool set is made for checking and setting the engine timing.
The included tools are suitable for following Ford Zetec, Zetec SE, Duratec petrol engines and
identical engines in models from Volvo and Mazda.
Engine Drive
1.25 Belt
1.4 Belt
1.6 Belt
1.7 Belt
1.8 Belt
1.8 Chain
2.0 Belt
2.0 Chain
2.3 Chain
USE
Crankshaft adjusting pin (1),
to be used as OEM
Ford 303-620, 21-163
Depending on the series, one of the three crankshaft adjustment pins is required for the 1.25 liter
engine.
Camshaft adjusting tool (4),
to be used as OEM
Ford 303-376B, 21-162B
Belt tensioner locking pin (5),
to be used as OEM
Ford 303-1054
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine code
DH A/B/C/D/E/F/G/H, FUJ A/B, F8J A/B,
M7J A/B, SNJ A/B, STJ A/B
ASD A/B, FH A/D/E/F, FXJ A/B/C, SPJ A/C,
RTJ A/B, FXD A/B/C/D, UTJA
FYD A/B/C/D/H, FYJ A/B/C, HWD A/B, L1
F/J/L/N/Q/T/V/W/Q, SHD A/B/C
MH A/B
EYD B/C/D/E/F/G/H/J/L, EYP A/C,
RK A/B/F/J/H/K
CGB A/B, CHB A/B,
CSD A/B, QQD A/B/C, Q7DA
EDB A/B/C/D, EDD B/C/D/F,
HMDA, NG A/B/C/D
CJB A/B, N4JB, AOBA, AOCA, AOD A/B/E,
AOW A/B, SYDA, TBW A/B, TBB A/B
GZF A/B/C, SEBA, SEWA
Crankshaft adjusting pin (2),
to be used as OEM
Ford 303-507, 21-210
Volvo 9997152
Mazda 49JE01061
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Tools
4-1/2/3
4-3-5
4-3-5
4-2
4-1
4-2
4-1
4-2
4-3
Crankshaft adjusting pin (3),
to be used as OEM
Ford 303-748, 21-259
Volvo 9997406, 9997152
Mazda 49JE02024
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed