Intended Use; Safety Informations; Environmental Protection - BGS technic 9327 Manual De Instrucciones

TOOLS
1 Separating tool with replaceable blade
2 Replacement cooper blade
3 Internal hexagon alley key, 2.5 mm
4 Cleaning adapter
5 15 Cleaning discs 3/4" (20 mm)
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This tool set is designed for separating of sealed components, e.g. oil pans on engines and
gearboxes or other difficult to separate seals. The steel blade can be replaced with the additional
copper blade for protection against damage to sensitive sealing surfaces.

SAFETY INFORMATIONS

•
Keep children and other persons out of the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the
environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Oil Pan Separating & Cleaning Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9327
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed