Intended Use; Environmental Protection - BGS technic 68340 Instrucciones De Uso

Ignition Coil Removing Tool Set | for VAG
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This set is used for removing ignition coils with final output stage (see chapter „Use").
SAFTY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if it is damaged.
•
Use the tool for the intended purpose only.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in personal injuries.
•
Do not install or remove ignition coil during the engine is running!
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 68340
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed