Instructions; Cleaning; Warranty; Maintenance - Metrix MX 655 Manual De Instrucciones

1.1.4.

Instructions

•
Before opening the instrument, disconnect it from the
measuring circuits and make sure that you are not charged
with static electricity, which could irreparably damage the
instrument's internal elements.
•
A "qualified person" is someone who is familiar with
the installation, the construction, the application and the
dangers at hand. This person is authorised to power up and
power down the installation and equipment, in compliance with
safety regulations.
1.1.5.

Cleaning

Turn off the power supply. Clean with a damp cloth and soap.
Never use abrasive products or solvents.

1.2. Warranty

This equipment is guaranteed against any material or
manufacturing defects, in accordance with the general
conditions of sale.
During the warranty period (1 year), the instrument can only be
repaired by the manufacturer, who reserves the right to repair
the instrument or to exchange all or part of it. If the equipment
is returned to the manufacturer, the outgoing transport costs
are borne by the customer.
The warranty is not applicable in the following cases:
1. improper use of the equipment or use of it in conjunction
with incompatible equipment;
2. modifications to the equipment without the explicit
authorisation of the manufacturer's technical department;
3. work carried out on the instrument by a person not
approved by the manufacturer;
•
adaptation for a specific application, not included in the
definition of the equipment or the user's manual
•
knocks, falls or flooding.
The contents of this manual must not be reproduced in any
form without our consent.

1.3. Maintenance

Return your instrument to your distributor for any work to be
done within or outside the guarantee.

1.4. Unpacking - Repacking

All the equipment was checked mechanically and electronically
before shipment. Every precaution was taken to ensure that
you receive the instrument undamaged. It is a good idea to
check quickly to detect any damage that may have occurred
during transport. If there is any damage, immediately notify the
transporter of the customary reservations.
Caution! If you ship this instrument on elsewhere,
use preferably the original packaging and indicate the reasons
for reshipment as clearly as possible in a note enclosed with
the equipment.
Our products are patented in FRANCE and ABROAD. Our
logos are registered trade marks.
We reserve the right to modify the characteristics and prices
should technological advances make it necessary.
18
Chapter II
MX 650 / MX 655