Remote Control Button Operations - Toshiba RBC-SRC-PE Manual Del Usuario

All manuals and user guides at all-guides.com
R
EMOTE
R C
EMOTE ONTROL
1. SWITCH COVER (OPEN)
2. Display Area
In order to make it easier to describe each
display, all the displays are shown. In actual fact,
however, only the displays corresponding to the
operation and settings will appear at any one
time.
3. Control Area
The buttons are pressed to select the desired
operation.
4. TIME ADJUST Button
This is used to set the time for the CLOCK, ON
TIME and OFF TIME mode. Each time it is
pressed the displays light up in the following
sequence: CLOCK ON TIME OFF TIME.
The time is set using the [- +] buttons. (For
details, see page 9.)
When the machine is stopped, the operation lamp and LOUVER display go off, but the other
displays remain unchanged.
Use the CHECK button for a trouble check. Do not operate this button under normal conditions.
GB
C
ONTROLLER
B O
UTTON PERATIONS
5. TIMER SELECT Button
This is used to select either continuous operation
or timer operation.
The following modes can be set with the timer
operation: ON, OFF, ON OFF, ON
and CYCLE. (For details, see page 10.)
- +
6. TEMP ADJUST ( ) Buttons
These buttons are used to set the required room
temperatures (18-29°C)
7. FAN Button
Selects the desired fan speed mode. Each time it
is pressed, the display changes in the following
sequence:-
AUTO LOW MED HIGH
8. MODE Button
Selects the desired operation mode. Each time it
is pressed, the display changes in the following
sequence:-
COOL FAN ONLY
CAUTION
– 5 – – 5 –
OFF