Cooling Operation - Toshiba RBC-SRC-PE Manual Del Usuario

All manuals and user guides at all-guides.com
R
EMOTE
C
OOLING
The main Isolation Switch needs to be set to the "ON" position (the operation lamp flashes.)
1. MODE Button
Selects the desired operation mode. Each time it
is pressed the display changes in the following
sequence:-
COOL FAN ONLY
2. FAN Button
Selects the desired fan speed mode. Each time it
is pressed, the display changes in the following
sequence.
AUTO LOW MED HIGH
In the AUTO mode, the fan speed changes
according to the room temperature.
3. TEMP ADJUST ( - + ) Buttons
These buttons are used to set the required room
temperatures (18-29˚C).
4. ON/OFF Button
When this button is pressed, the air conditioner
is started or stopped.
GB
C
ONTROLLER
O
PERATION
5. LOUVRE Button
To drive the outlet louvers automatically, press
this switch.
If the operation is stopped and then the
ON/OFF button is pressed immediately, the air
conditioner will not operate for about 3
minutes, to protect the unit.
After approximately 3 minutes, operation will
be restarted automatically.
For details on how to use the timer, see pages
10/11.
– 8 –