Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
16 electrolux
9. Turn the two fasteners by 90° and re-
move them from their seats.
10. Carefully lift (step 1) and remove (step
2) the panels of glass one by one. Start
from the top panel of glass.
1
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels
1
2
3
(
), (
) and (
) back in the correct
sequence (refer to the illustration).
All manuals and user guides at all-guides.com
The middle panels (
tive frame. When you install them, make
90°
sure that the screen-printing zone looks to
the inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame (
ing zones is not rough when you touch it.
Make sure that you install the panels of
glass in the seats correctly (refer to the illus-
tration).
2
Replacing the oven light bulb/cleaning
the glass cover
1. Turn the glass cover anti-clockwise to re-
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
1
2
3
2
-
2
3
-
) on the screen-print-
Warning! Be careful! There is the risk
of electrical shock!
move it.
ble 300°C heat-resistant oven light bulb.
3
) have a decora-
Publicidad
Capítulos
Tabla de contenido
