Steren INT-500 Manual De Instrucciones página 2

Sistema de intercomunicación inalámbrico

Idiomas disponibles

All manuals and user guides at all-guides.com

Before using your new Wireless Intercom System, please

read this instruction manual to prevent any damage. Put it

away in a safe place for future references.

IMPORTANT

Do not expose to extreme temperatures.

Clean only with a soft, dry cloth.

Do not use or store the equipment near wet places. May cause

malfunction.

If you hear some interference signal in your equipment, maybe

there are too close, put them away.

Unplug the devices when you don't use them for a long period of

time.

To start to use the new equipment, follow these instructions:

1.- Allows you a two-way communication, to use at home or

ofﬁ ce.

2.- Use it on the baby's room for monitoring. Always hear all the

sounds because of the sensitive microphone.

3.- Just plug into an AC household outlet, and you'll be ready to

use it.

4.- CALL: use this button to call to other equipment.

5.- TALK: press and hold this button to talk in a conversation.

6.- AUTO: use this feature for a permanent monitoring (such as

baby's room). You will hear everything without pressing other

button.

7.- 3 CHANNEL: Use this function to add other INT-500 unit,

each channel can be placed in a room such as monitor or allows

the 2-way communication.

8.- Expandable system, up to 8 different units can work together.

9.- LEDs indicator while using the equipment.

10.- VOLUME: allows you to set the volume level in accord to the

place where you install the equipment.

11.- Designed to use in a ﬂ at surface or mounted in a wall.

You can connect up to 8 intercoms in one or three available

channels.

If you hear some noise while talking, probably is caused by

other electrical devices, such as blenders, refrigerators, hair

dryer, etc.

ENGLISH-2