mega macs 77
5 Putting Into Operation
This section gives a description of how to switch the device on and off as well as all the necessary steps for the first
EN
use of the device.
5.1
Charging the Battery through Plug Socket
Prior to initial start-up of the device, charge the battery for at least 8 to 10 h while the device is switched off.
Proceed as follows to charge the battery through wall socket:
1. Insert the voltage supply plug into the device's socket.
2. Insert the power plug into the plug socket.
The battery is charged.
5.2
Charging the Battery through Docking Station
Prior to initial start-up of the device, charge the battery for at least 8 to 10 h while the device is switched off.
Proceed as follows to charge the battery through docking station:
1. Insert the voltage supply plug into the docking station port.
2. Insert the power plug into the plug socket.
The battery is charged.
5.3
Switching On the Device
To switch on the device:
1. Briefly push the ON/OFF button.
The general terms and conditions appear.
2. Read the general terms and conditions and confirm them at the end of the text.
A user selection window appears.
The respective user name is saved for all data stored in the Car History. This enables quicker identification of the
mechanic who performed the repair work if a query is subsequently made.
3. Double-click
4. Enter the user name.
5. Confirm your entry with
6. Activate the Stay logged in check box if necessary.
If the Stay logged in check box is activated, you will not need to select a user name when switching on in the
future.
7. Confirm your entry with
The input is saved automatically. The main menu appears.
Now you can start working with the device.
42
NOTE
When starting the device for the first time and after every software update, you need to confirm
the general terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain
device functions will be unavailable.
.
.
.
Putting Into Operation
Charging the Battery through Plug Socket