Inspect The Unit Before Installing; Install Interface Brackets On Display - CHIEF D8089 Manual Del Usuario

Installation Instructions

INSPECT THE UNIT BEFORE INSTALLING

1. Carefully inspect the mount for shipping damage (see Fig-
ure 1). If any damage is apparent, call your carrier claims
agent and do not continue with the installation until the
carrier has reviewed the damage.
NOTE: Read all instructions before starting installation.
2. Lay out components to ensure you have all the required
parts before proceeding. See "PARTS LIST" on page 4.
INSTALL INTERFACE BRACKETS ON
DISPLAY
Install the interface brackets as follows:
1. Place the interface brackets (20 and 30) on the back of the
display, aligning the holes with the mounting inserts. See
Figure 1 and Figure 2.
2. Secure the left and right interface bracket assemblies (20
and 30) to the display using shoulder washers (60) and
screws (40). See Figure 3.
Figure 2. Install Brackets on Display
Figure 3. Attachment Parts
MSP-DCCPDPT
5