Mount The Msr - CHIEF MSR Instrucciones De Instalación

Installation Instructions
Wood Stud Instructions (Option A)
(Cont'd)

Mount the MSR

To mount the MSR, do the following:
1. Place MSR against the wall. Align the mount with
the pilot holes drilled in the preceding procedure
(see Figure 3).
2. Install the lag bolts (20) and washers (30) into the
pilot holes previously drilled, as described below.
•
Install two lag bolts (20) and two washers (30) for
single wood stud mounting.
OR
•
Install four lag bolts (20) and four washers (30)
into the slotted holes for dual wood stud mounting.
3. Tighten the lag bolts.
Slotted mounting holes
for dual wood studs
Figure 3. Mounting Holes for Wood Studs
MSP-DCCPOR
Mounting holes for
single wood stud
5