Ryobi RY15518 Guia De Inicio Rapido

1 Carefully remove the product and any accessories from the box. Make sure that all items listed in
the packing list are included. Remove rubber end cap and hanger cap from the edger attachment shaft before installing.
2
Install the edger attachment shaft into opening on the gear head so that the hole on the top of the attachment shaft
lines up with the shaft screw as shown. Be sure the arrows on the gear head and the edger attachment shaft
Tighten the shaft screw into the hole on the edger attachment shaft using supplied wrench.
3
Tighten securely by turning the gear head screw to clamp gear head around shaft.
When fully secure, the shaft cannot be rotated.
4
Loosen the knob on the coupler of the power head shaft.
5
Push in the button located on the edger attachment. Align the button with the guide
recess on the power head coupler and slide the two shafts together.
5
6
Tighten the knob securely.
Make The Most Of Your Purchase!
Go to www.ryobitools.com and register your new tool on-line.
For any questions about operating or maintaining your product, call the Ryobi Help Line !
Your Product has been fully tested prior to shipment to ensure your complete satisfaction.
Troubleshooting tips are available in your operator's manual.
To register your Ryobi product or set up your eBox™ account by regular mail, please print the following
®
information on a 3"x5" card or standard postcard: your name, mailing address, phone numbers, email address,
Ryobi product(s) purchased with item number from package, and serial number for each product.
®
Mail the card to: Ryobi Technologies, Inc. Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson,
SC 29625.To receive information on our company and products, please include the following statement on your
registration card: "Send me information on your products and company using the contact information I am
providing with this product registration."
All manuals and user guides at all-guides.com
HOW TO GET STARTED
meet.
3
2
4 6
RYOBI ART WORK
Art Part No. : 987000407
Where Used : 987000407
Refer to Drawings for Dimensions.
Material: 60lb. Stock Paper.
Color: Lift-o Bright Pink.
FRONT
1
987000407
7-09-08 REV:02
Rev:02