Installing And Connecting The Pp Switch Cabinet; Installing The Pp Cabinet In The Exterior Cabinet - Graf 106589 Instrucciones Para La Instalación Y El Montaje

4. Installing and connecting the PP switch cabinet

4. Installing and connecting the PP switch cabinet
4.1

Installing the PP cabinet in the exterior cabinet

Insert the screws from the outside.
The fastening materials included with the PP cabinet are not required.
The cover of the PP switch cabinet is not required. Undo the screw and remove the cover.
The bracket of the PP cabinet is attached to the
rear wall of the exterior switch cabinet with the 4
screws and nuts provided.
Secure the screws with the M8 washers and nuts.
Insert a screw into each of the fastening holes of the
bracket. Then install the bracket inside the exterior
switch cabinet and insert the screws into the fixing
holes.
Secure the screws only hand-tight.
/