Fitting The Remote Panel - Zanotti GM1 Manual De Uso Y Manutención

A
GM1 735
GM2 830
GM3 830
GM340 830
6.6 Fitting the remote panel (optional)
Fix the back plate to the wall using the pre-drilled holes; be careful the panel is kept in a vertical position.
Fit the connecting cable between panel and unit making sure not to bundle it with other cables.
ATTENTION
Maximum distance between panel and unit is 10 mt. For longer distances the special
"long distance module" should be used (optional).
ATTENTION
Check that the unit and its devices have suffered no damages during transport. Pay
special attention to the components secured to the electric panel door and to the
refrigerating circuit pipes. Mount the unit as shown in the drawings; make sure that the
electric connections are carried out properly.
B C
264 280
264 280
364 350
364 410
D E
110 400
110 400
110 400
110 522
F G
335 375
335 590
440 590
440 590
H
100
100
100
100
25