Operation
FILLING THE FILTRATION SYSTEM
1.
Open the top cover.
2.
Pour cold tap water into the upper
chamber.
Caution: Hot water should not be used with the GWF8/GWF3 Water
Dispenser Filtration System (Max. 85˚F / 29˚C – Min. 32˚F / 0˚C).
3.
Close the top cover.
4.
Add water regularly to ensure the
long-life filter is immersed in water
at all times between the "MIN" and
"MAX" levels indicated on the lower
chamber.
Warning: To avoid leaking and/or overflowing, do not exceed the
max levels. Do not add water to the upper chamber if the lower
chamber is full.
Going Away On Vacation
When not using the water filtration system for more than a week or when going
on vacation, please ensure the lower chamber is full and the filter immersed in
water, as the long-life filter will dry out. Always drain out any residual water when
ready to start using it again. If the water filtration system has not been used for
an extended period of time, please replace the long-life filter and wash top and
bottom chambers.
1
3
2
4