Technical Data - MSA F1 XF Manual Del Usuario

Technical Data

6 Technical Data
Use only batteries recommended below.
The use of others batteries does not ensure the ATEX certification for ATEX certified products. Using
batteries other than those recommended can lead product damage. MSA accepts no liability in cases
where other batteries were used.
Hearing Protection
Specification
Interoperability
Technical
specifications
Headset batteries
GB
Weight
Environmental
conditions
10
Description
Operates with an MSA Push-to-Talk (PTT) module enabling connection to the PMR
(Professional Mobile Radio) radio.
Connection through an anti-tearing LEMO plug with color codification.
-
PTT module with yellow or red connector: non ATEX system
-
PTT module with green or blue connector: ATEX system (for use with approved
ATEX radios only)
Flexible microphone
Bone conductive micro-
phone
Loudspeaker
SNR
Surrounding sound ampli-
fiers
Material
Type
Estimated operating time
Headset batteries for ATEX
use
Hearing Protection with
-
Flexible microphone
-
Bone conductive
microphone
-
Level dependant func-
tion only
Use:
Storage:
Communication Accessories and Hearing Protection F1 XF
WARNING
Noise cancelling electret, bandwidth 100Hz-10kHz,
sensitivity -61dB (nominal) at 50% humidity
Accelerometer, bandwidth 20 Hz - 20 kH
Sensitivity 1 mV / mG
32 Ω bandwidth 100Hz-20kHz, Max. power 100 mW
26 dB
Omnidirectional, sensitivity -38±2dB,
Max input 110dB S.P.L
Cup: PC/ABS
Cushion: Synthetic leather
2×1.5 V AAA/LR03
ca. 600 hours
-
ENERGIZER E92
-
ENERGIZER Ultra Plus
-
DURACELL PLUS MN 2400
-
VARTA 4903
The device may only be powered by 2 identical cells.
380 g ± 10g
380 g ± 10g
360 g ± 10g
-20 °C to + 50 °C, relative humidity 0 to 98%
-40 °C to + 80 °C, relative humidity 0 to 98%