Maintenance And Servicing - Tru-Test 5000 Serie Guia De Inicio Rapido

Maintenance and servicing

Backing up your information
We strongly recommend that you regularly back up the data on your indicator by
transferring it to a PC using Data Link or a USB flash drive.
Updating your software
We recommend that you regularly update the indicator software so that you keep up
with the latest features and improvements.
To update the indicator's software:
1 Connect the indicator to a PC using the cable supplied.
2 Launch Data Link on your PC.
3 Click Tools / Updates.
4 Follow the step-by-step instructions.
For more information, see the Data Link help.
When updating software, the data on your indicator will remain intact.
However, we strongly recommend that you back up the indicator's
database onto a PC
fails, Technical Support will help you to restore your data from the backup.
Caring for the indicator
Do not leave the indicator or load bars submerged in water. Store the indicator in a
cool, dry place.
Wipe the indicator using a damp cloth, warm water and soap. Other cleaners may
damage the case.
When the power/serial connector and load bar connectors are in use, join the dust
caps together. When they are not in use, fit the dust caps to the connectors. Always
replace the rubber cover over the USB ports when they are not in use.
Disposal
This product (and its battery/batteries, where applicable) must be disposed of separately from household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where you can drop off your waste equipment
for recycling, please contact your local city recycling office or the dealer from whom you purchased the product.
before
updating. In the unlikely event that an update
11