Rexing 6448420 H3 Trail Manual Del Usuario página 11

♦ Press the edge of the card gently to pop-up the TF
card.
Ø Basic Operation
Turn On And Off The Camera
Switch the Mode Button to "Test" to turn on the
camera.
Switch the Mode Button to "Off" to turn off the
camera.
System Setup
Switch Mode Button to "Test", then you can set the
system parameters.
1. Press Video/Photo button to switch between
these two modes.
2. Press Menu button to open the setup menu.
3. Press Up/Down button to scan all menu. Then
press OK button to enter the options interface.
4. Press Up/Down button to scan all options. And
press OK button to confirm options.
5. Press Menu button again to turn back to last
menu or exit the setup menu.
8