Rexing 6448420 H3 Trail Manual Del Usuario página 23

2. If this light turns blue, you are detected by one of
the activated side motion sensors. If lights turn
green, you are detected by the front motion sensor.
By this way, you can align the camera to the best
angle and distance.
Working Mode
Switch the Mode Button to "TEST". After turn on the
camera, the upper right corner should show the
capacity of shooting, and then turn the Mode button
to the "ON", the screen will display 15 seconds
countdown, then the LEDs and screen will go out.
The camera begins to operate independently and
enter standby mode.
If the wild animals enter the detection range of the
motion sensors, the camera will quickly turn on and
take a picture or video. After the shooting, the
camera automatically returns to the standby mode
and waits for the next sensor trigger to shoot (the
interval between the next trigger is the time set
based on the user's motion sensing in the menu)
20