Rexing 6448420 H3 Trail Manual Del Usuario página 9

17.Front Motion Sensor
18.Side Motion Sensor
19.DC port
20.Infrared
Ø Power Supply
Please install batteries before using the camera.
♦ Open the camera case and remove the battery
cover. Install 12 pieces of 1.5V AA brand Alkaline
batteries. Please make sure the electrode is correct.
♦ If the camera is in low power, please connect the
camera to a power adapter(not provide) for power
supply; When power supplied, the adapter must use
DC6V / 1.5A (it must have enough current of 1.5A or
more); if the adapter is not used properly, the
machine may be burned. The adapter only powers
the machine and has no charging function.
Inserting Storage Media
6