Rexing 6448420 H3 Trail Manual Del Usuario página 29

♦ Mark the drill holes by holding the foot of the wall
bracket at the desired mounting location and
marking the hole positions.
♦ Use a drill with a 6 mm drill bit to drill the required
holes and insert the plugs and insert the wall plugs
flush with the wall.
♦ Screw the wall bracket to the wall using the
supplied screws.
♦ Mount the camera on the tripod screw and screw
the camera a little way on (about three turns).
♦ Turn the camera in the desired direction and lock it
with the lock nut.
♦ To move the camera into its final position, undo
the two pivot bolts a little, position the camera and
fix the position by tightening the two pivot bolts.
Ø Connecting To TV
The camera can transfer the video signal to an
external monitor or a television. Please follow below
instructions to operate.
1. Connect the camera to the TV via provided AV
cable.
26