Assembling The Wheels - Huffy Lil Cruzer Balance Manual De Instrucciones

Assembling the Wheels

NOTE:
• The front and rear wheels attach the
same way, with safety washers.
1. If the Axle Nuts 
attached to the wheel axle
by removing them with an open end
or adjustable wrench.
2. Set the wheel into the Wheel

Dropouts .
3. Install Wheel Retainers
sure the tabs are in the Dropout tab

holes .
4. Attach the wheel with the Axle Nuts

.
5. Make sure the wheel is in the center
of the fork/frame and tighten Axle
Nuts securely.
WARNING
• Ensure wheel spins freely without contacting the frame or fork.
• Failure to obey these steps can allow the wheel to loosen while riding. This can cause
injury to the rider or to others.
are already
 , begin

making
:
E
D
A
B
C
7