1. Manuales
  2. Marcas
  3. Topeak Manuales
  4. Portabebés
  5. BabySeat II
  6. Manual de instrucciones

Topeak BABYSEAT II Manual De Instrucciones

Ocultar thumbs Ver también para BABYSEAT II:
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
BABYSEAT II
BABYSEAT II
EN
Suspension Child Carrier
User needs to check whether there are any laws specific to the carrying of children
in seats attached to cycles that apply in the locality in which the seat is used.
The proper size and adjustment of bicycle for the rider should be verified
in the information supplied with the bicycle, or obtain information
from the manufacturer or supplier of the bicycle.
It is recommended a professional bicycle shop assemble and
install the BabySeat II to your bike.
It is imperative that you read this owner's manual prior to installation.
Max Weight: 48.5 lb / 22 kg
(For the EU Community, meets EN-14344 Class A22 regulations)
40 lb / 18 kg
(For USA, meets ASTM F1625 regulations)
TOOLS REQUIRED FOR ASSEMBLY: 5mm Allen Key
Topeak BABYSEAT II
Art No. TCS-2203 / TCS-2204 / TCS-2205 / TCS2204-E

Publicidad

Tabla de contenido
loading

Manuales relacionados para Topeak BABYSEAT II

Resumen de contenidos para Topeak BABYSEAT II

  • Página 1 It is recommended a professional bicycle shop assemble and install the BabySeat II to your bike. It is imperative that you read this owner's manual prior to installation. Max Weight: 48.5 lb / 22 kg...

  • Página 2: Tabla De Contenido

    Table of Contents Getting To Know Your Topeak BabySeat Mounting Rack To Bicycle Mounting BabySeat To Rack Surface Securing BabySeat To SeatPost Opening Grab Bar Adjusting Height Of Footrests Fitting Your Child In BabySeat Release Seat Pad Caution Notes...
  • Página 3 Mounts Mounts to rack to rack Mounts to bicycle Mounts to bicycle...

  • Página 4: Getting To Know Your Topeak Babyseat

    Getting To Know Your Topeak BabySeat These pages will help you to identify the different parts of your Topeak BabySeat. ILLUSTRATED PARTS LIST: SEAT REFLECTOR SHOCK ABSORBING BASE RACK SPRING BARREL x 2 GRAB BAR SECURING BUCKLE GRAB BAR PAD...

  • Página 6: Mounting Rack To Bicycle

    Mounting Rack To Bicycle Follow these illustrations for mounting rack to bicycle. Make sure rack is level with ground before tightening hardware. Several adjustments are available to help level rack. Slide rack hardware forward or back to determine correct positions before tightening Phillips screws on rack surface.
  • Página 7 CAUTION The Topeak BabySeat is designed to work on frames with seatstay rack mounts AND threaded dropout eyelets only. Do not use the Topeak BabySeat on frames without these fittings for safety reasons. BabySeat Rack w/o disc Mounts M5 x 15mm...

  • Página 8: Mounting Babyseat To Rack Surface

    Mounting BabySeat To Rack Surface Mount BabySeat on rack Remove slide lock from storage position CLICK Hook seat onto front rail of rack. Rotate seat down on Press the red button and pull the rack surface until snapped into positive engagement. slide lock back away from seat.

  • Página 9: Securing Babyseat To Seatpost

    Securing BabySeat To SeatPost "T" type loop and hook strap is a safety device designed to connect BabySeat and seatpost. Please be sure to fasten it to seatpost immediately after mounting BabySeat on rack. The "T" strap should only be disconnected from seatpost if removing BabySeat from rack.

  • Página 10: Opening Grab Bar

    Opening Grab Bar Lift up the lever Press tabs and lift to open grab bar as shown.

  • Página 11: Adjusting Height Of Footrests

    1. Have someone help support bicycle while placing child in BabySeat. 2. Place child in comfortable position in BabySeat II. Adjust and fasten safety harness over child. 3. Note position of child's feet and legs and tighten the foot straps after placing child in comfortable position.

  • Página 12: Fitting Your Child In Babyseat

    Fitting Your Child In BabySeat BabySeat shoulder buckle straps adjust in a high or low position. Make sure they are in the correct position for your child's size. Shoulder Strap Is Too High. High Position Shoulder Strap Is Too Low. CAUTION Low Position Make sure the buckle straps are assembled correctly on the...

  • Página 13: Release Seat Pad

    Release Seat Pad Release the buckle strap from back side. Remove the fastener on the both sides of BabySeat. Release strap on the bottom of seat pad and release the buckle strap. Release the buckle strap from back side of seat pad and remove the seat pad from the back...

  • Página 14: Caution Notes

    CAUTION 1. Tighten fasteners securely before each use and check them frequently. 2. Do not carry a child who is too young to sit independently in the carrier. (A pediatrician should be consulted before any child younger than one year is carried.) 3.
  • Página 15 33. Please connect your nearest Topeak authorized bicycle dealer if you found any broken or damage parts of the babyseat.
  • Página 16 Remove BabySeat II From Rack Press the yellow lever and Remove the slide lock then red button at the same time push into storage position Lift off BabySeat Please contact your Topeak dealer with any questions. For USA customer service call: 1-800-250-3068 www.topeak.com...
  • Página 17 STANDARD-VERSION / SANS ADAPTATEUR À DISC-MOUNTS / ADAPTATEUR À DISQUE / TIPO Ce manuel couvre les porte-bagages pour BabySeat II avec montage sur un vélo avec ou sans freins à disques. DISQUE / TIPO SIN DISCO / SENZA DISC MOUNTS / DISCO / DISC MOUNTS / Véri er les informations spéci ques à...
  • Página 18 1. L’età ed il peso limite per il portapacchi Rack for are 1~4 years old, and 20lbs ~ 48.5lbs (9kgs ~ 22kgs) BabySeat II sono da 1 a 4 anni, e da 9 a 22 kg di peso. PER BABYSEAT II / / 尾燈安裝說明...

Tabla de contenido